News

What Hydraulic Oil Filter Fits a Bobcat T550 or T590?
If you are searching for a hydraulic oil filter for a Bobcat T550 or T590 compact track loader, one of the most important numbers to check is 7024037. This filter is also commonly searched under the cross-reference number WL10392. The same filter may be used on select Bobcat skid-steer loaders, including the S510, S530, S550 and S590. However, Bobcat parts can change according to the machine’s production date, engine configuration and serial number, so the model number alone should not be treated as final confirmation. What Does the Hydraulic Filter... Read more...
How to Replace a Hydraulic Quick Connect Coupler
Replacing a hydraulic quick-connect coupler requires the correct replacement component, a fully depressurized hydraulic system, clean working conditions, and careful inspection of the hose or equipment connection. The replacement coupler must match the original profile, nominal body size, rear thread, pressure rating, flow capacity, and application requirements. Quick answer: Shut down the equipment, relieve all hydraulic pressure, clean the connection, identify the original coupler and rear thread, remove the old component with the correct tools, install the replacement according to its sealing method, and test the system carefully for leaks.... Read more...
Hydraulic Coupler Pressure Ratings Explained
Hydraulic coupler pressure ratings indicate the amount of hydraulic pressure a coupler is designed to withstand under specified operating conditions. Selecting the correct rating requires more than comparing a single PSI number. Working pressure, proof pressure, burst pressure, pressure spikes, flow rate, temperature, connection status, coupler size, and application conditions can all affect performance. Quick answer: Select a hydraulic coupler with a maximum working-pressure rating that meets or exceeds the highest pressure the system may experience. Do not use proof pressure or burst pressure as the normal operating rating. What... Read more...
How to Match Male and Female Hydraulic Couplers
Matching male and female hydraulic couplers requires more than finding two components with the same advertised size. The coupler profile, nominal body size, locking design, rear thread, pressure rating, flow capacity, and application requirements must all be compatible. Two hydraulic couplers may look similar and even begin to connect while still using different standards or sealing designs. An incorrect match can cause leakage, restricted flow, damaged seals, unexpected disconnection, or complete connection failure. Quick answer: Match the male and female couplers by connection profile first, then verify nominal body size,... Read more...
Why Is My Hydraulic Quick Coupler Leaking?
A leaking hydraulic quick coupler may be caused by worn seals, damaged internal valves, contamination, incorrect mating halves, loose rear connections, excessive pressure, or physical damage. The location and timing of the leak can help identify the cause. A coupler that leaks while connected may have a different problem than one that drips only after disconnection. Quick answer: Clean the coupler, relieve all hydraulic pressure, identify exactly where the fluid is escaping, and inspect the seals, valve, locking mechanism, rear threads, and mating profile. Replace damaged components rather than forcing... Read more...
Flat-Face vs Agricultural Hydraulic Couplers: What Is the Difference?
Flat-face and agricultural hydraulic couplers are both used to connect hydraulic hoses and equipment, but they have different mating profiles, operating characteristics, and common applications. Flat-face couplers are widely used on skid steers, construction machinery, and hydraulic attachments where reducing fluid loss and contamination is important. Agricultural couplers are commonly used on tractors, implements, loaders, and other farm equipment. Quick answer: Flat-face couplers have nearly flush mating surfaces that help reduce fluid loss and contamination. Agricultural couplers use a projecting plug and sleeve-style connection commonly found on tractors and implements.... Read more...
JIC vs NPT vs ORB Hydraulic Fittings: What Is the Difference?
JIC, NPT, and ORB fittings are commonly used throughout hydraulic systems, but they are not interchangeable simply because their thread diameters appear similar. Each connection uses a different sealing method. JIC fittings seal against a 37-degree flare, NPT fittings seal through tapered-thread engagement, and SAE O-ring boss fittings seal with an O-ring against a machined port surface. Quick answer: JIC uses straight threads with a 37-degree flare, NPT uses tapered pipe threads, and ORB uses straight threads with an O-ring near the fitting shoulder. JIC vs NPT vs ORB at... Read more...
How to Identify Hydraulic Coupler Size and Thread Type
Identifying the correct hydraulic coupler requires more than measuring the outside of the fitting. Coupler body size, connection profile, thread diameter, thread pitch, and sealing method must all match the equipment or hydraulic hose. This guide explains how to identify common hydraulic quick-connect couplers and determine whether a connection uses JIC, NPT, ORB, BSP, ORFS, or another hydraulic thread style. Quick answer: Start by identifying the coupler profile and nominal body size. Then measure the thread diameter, determine whether the threads are straight or tapered, count the threads per inch,... Read more...